How To Build Android on FreeBSD

by thinker

關鍵字:

To build $Android$ on $FreeBSD$, you should get a copy of source tree of $Android$, and apply changes provided by FreeBroid.  The steps to get a copy of source tree are
 * mkdir android
 * cd android
 * repo init -u git://android.git.kernel.org/platform/manifest.git
 * repo sync
 * git clone git://gitorious.org/freebroid/freebroid.git
 * cd freebroid
 * ./fetchgitorious.sh ../
 * ./switch2freebroid.sh ../
Now, you have a copy of working tree that is ready to build $Android$ on $FreeBSD$.

== Build ==
Before build $Android$, you should install jdk (diablo-jdk-1.5.0.07.01_16) and swt (swt-3.4_1).  Then, you can start the procedure of building $Android$.
 * ANDROID_JAVA_HOME=/usr/local/diablo-jdk1.5.0/
 * export ANDROID_JAVA_HOME # for bash
 * gmake
Then, take a cup of coffe, and wait for building system.  That is all!

== Know Issues ==
The prebuilt toolchain provided by FreeBroid is for $FreeBSD$-9.0 current.  You may have to build your own toolchain if the toolchain does not work for installed version.  The toolchain includes binutils-2.20.51 and gcc-4.4.0.

The instructions of building binutils-2.20.51 are
 * ../configure --prefix=/path/to/android/prebuilt/freebsd-x86/toolchain/arm-eabi-4.4.0/ --target=arm-unknown-eabi
 * gmake
 * gmake install

The instructions of building gcc-4.4.0 are
 * ../configure --prefix=/path/to/android/prebuilt/freebsd-x86/toolchain/arm-eabi-4.4.0/ --target=arm-unknown-eabi --enable-languages=c,c++ --host=i386-unknown-freebsd9.0 --disable-threads --disable-shared --disable-libgomp --disable-libstdc__-v3 --disable-libmudflap --disable-libssp
 * gmake
 * gmake install

最後更新時間: 2009-11-07 12:45:09 CST | 引用

查詢:

COMMENTS:

on 2010-06-30 22:52:45 CST

zyanho said ..

你好，不知道我可否说中文，你的博客和freebroid wiki上的安装有一个地方写错了，./switch2freebroid.sh ../ 但是git的存储的是switch2freedroid.sh,名字拼错了.然后我运行switch2freedroid.sh得到了一些错误error: pathspec 'FreeBSD-host' did not match any file(s) known to git.请问我该如何解决?谢谢

on 2010-06-30 22:54:19 CST

zyanho said ..

你好，不知道我能否說中文，你的博客和freebroid wiki上的安装有一个地方写错了，./switch2freebroid.sh ../ 但是git的是switch2freedroid.sh,名字拼错了.然后我运行switch2freedroid.sh得到了一些错误error pathspec FreeBSD-host did not match any file(s) known to git.请问我该如何解决?谢谢

on 2010-07-05 22:36:19 CST

Thinker said ..

你能直接發個 email 到我的信箱 thinker AT branda to 嗎? 順便把錯誤訊息也一併寄給我。